by BHS
1 used & new from $11.99
(Visit the Best Sellers in Tubing list for authoritative information on this product's current rank.)
This "dual wall" heatshrink is adhesive lined for a waterproof seal. As the tubing is heated, the inner adhesive layer begins to flow much like a hot melt glue. After the tubing shrinks and cools down, you are left with an adhesion layer between the tubing and the encased component or wire. 4:1 Shrink Ratio (Tubing can shrink to 1/4 of its original diameter) makes getting the tubing past bulky plugs or connectors much easier. *Specifications:* UL 224 VW-1 * CSA OFT recognized -- Meets requirements of AMS-DTL-23053/4 (formerly MIL-I-23053/4) Class 3 -- Shrink Temperature of 100�C and operating temperature of -55�C to + 110�C -- Maximum Continuous use temperature 110�C -- Longitudinal Shrinkage: Up to 15% -- Crosses to: Sumitomo W3B2(4X), Raychem ATUM 4X, LG GSHS-4635WT -- Excellent for Insulation, Wire Bundling, Wire/Cable Protection, Physical and Electrical Protection of Components, Solder Insulation, Strain Relief. ***** You will receive 4 pieces of heatshrink, with each being roughly 12" in length. Some pieces may be slightly longer than others (see picture for example), and some ends may not be cut perfectly straight (cut by hand), but total amount of heatshrink will equal 48" in length. We cut each set of 4 pieces from a single manufacturer supplied piece that is 48" in length for easier shipping and handling. *****
No comments:
Post a Comment